{ "id": "pop-up-bathroom-sink-stopper-with-basket", "sku": "pop-up-bathroom-sink-stopper-with-basket", "title": "Pop Up Bathroom Sink Stopper", "slug": "pop-up-bathroom-sink-stopper-with-basket", "price": 23.99, "currency": "CAD", "availability": "in_stock", "category": "sink-and-tub-stoppers", "category_label": "Sink & Tub Stoppers", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": null, "images": [ "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/pop-up-bathroom-sink-stopper-with-basket/main-pop-up-bathroom-sink-stopper-with-basket.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/pop-up-bathroom-sink-stopper-with-basket/pop-up-bathroom-sink-stopper-with-basket-2.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/pop-up-bathroom-sink-stopper-with-basket/pop-up-bathroom-sink-stopper-with-basket-3.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/pop-up-bathroom-sink-stopper-with-basket/pop-up-bathroom-sink-stopper-with-basket-5.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/pop-up-bathroom-sink-stopper-with-basket/pop-up-bathroom-sink-stopper-with-basket-6.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/pop-up-bathroom-sink-stopper-with-basket/pop-up-bathroom-sink-stopper-with-basket-7.jpg" ], "description_short": "Brass and stainless steel build, a removable anti-clogging basket inside, a stepped silicone gasket to help hold back drain odour, and a tool-free swap that takes a minute.", "description": "The small annoyance that turns into a real problem\n\nBathroom sink drains get ignored until they stop working. The rubber plug goes walkabout. The chrome insert that came with the sink starts letting water seep out while you are trying to shave or soak something. Hair builds up somewhere you cannot see, and one morning the water sits there for twenty seconds before it goes down.\n\nNone of this is dramatic. It is just irritating, every single day, in a room you use half a dozen times before breakfast. And the fix most people reach for, a chemical bottle from under the sink, treats the symptom and leaves the cause exactly where it was.\n\nA pop up bathroom sink stopper with a basket inside deals with both ends of the problem at once. It seals properly when you want a full sink, and it stops the hair before the hair becomes a blockage.\n\nHow a push button stopper works\n\nThe mechanism is simple and it has been around a long time. Inside the stopper body there is a spring loaded core with a bullet shaped centre. Press the cap down and the core drops, locks into position and pulls the seal firmly against the inside wall of the drain. Press it again and the lock releases, the spring pushes the core back up and the water drains.\n\nThe seal on this model is a thickened stepped silicone gasket. The stepped shape matters because it gives the gasket more than one point of contact against the drain wall, which is what keeps a seal tight when a sink is full of water. It also helps hold back odour drifting up from the drain while the stopper is closed.\n\nThat is the sealing half. The catching half is the basket sitting inside the body. Hair, soap flakes, grit and the occasional small item that slips off your finger land in the basket rather than going down the pipe. You lift the stopper out, tip the basket and rinse it.\n\nWhy metal matters here\n\nDrain hardware lives in water. Not occasional water, constant water, with soap, toothpaste and whatever else goes down a bathroom sink. Thin plastic parts get brittle. Cheap plated finishes flake.\n\nThis stopper uses brass with stainless steel, and the maker describes the build as thickened and anti-cracking, with a structure intended to last without splitting or leaking at the seal. Brass is the traditional choice for this job because it handles water well and machines to a tight tolerance, which is exactly what a sealing surface needs. The top face is flat and smooth, so pressing it with a wet finger is comfortable rather than fiddly.\n\nIf you have replaced a plastic drain stopper before and watched it go cloudy and stiff in a year, the difference in feel is noticeable the first time you press it.\n\nGetting the size right before you buy\n\nThis is the part worth slowing down for, because a drain stopper either fits or it does not. There is no middle ground and no adjusting it afterwards.\n\nThe maker gives two numbers. The drain opening should measure between 1.02 inches and 1.96 inches, roughly 26 mm to 50 mm. And the drain needs to be at least about 1.89 inches deep, roughly 48 mm, so the body of the stopper has somewhere to sit.\n\nMeasuring the width is easy. Lay a ruler across the drain opening and read the distance from one inside edge to the other, not across the outer flange. For the depth, drop a thin screwdriver or a chopstick in until it stops, mark where it meets the drain rim with your thumb, then measure that length.\n\nThose two numbers take about a minute to get and they save you a return. If your drain opening is wider than two inches, this is not the right part, and no amount of hoping will change that.\n\nOne more check. Lift your current stopper straight up. If it comes out freely, you are set. If it is attached to a rod under the sink, it is a lift rod style stopper and removing it means working underneath the basin. That kind of fixed plumbing work is best left to a licensed plumber.\n\nWho this suits\n\nHouseholds with long hair get the most out of it. Hair is the single biggest cause of slow bathroom sink drains, and a basket sitting right at the entry point is the most practical place to intercept it. A good sink drain hair trap stops the slow build-up that eventually needs a plumber.\n\nRenters do well with it too. Nothing is cut, nothing is glued and nothing is permanent. Keep the original stopper in a drawer, use this one while you live there and swap back when you leave.\n\nIt also suits anyone who actually fills their bathroom sink. Washing delicates, soaking a razor, rinsing a paintbrush, shaving over a basin of warm water. All of that needs a stopper that genuinely holds water for ten minutes, not one that drops the level by an inch while you are not looking.\n\nIf you have never been able to find a loose plug that fits your sink, a push button drain stopper solves that too. There is no chain, no plug sitting on the edge of the counter and nothing to lose.\n\nFitting it\n\nTake the old stopper out. Give the inside of the drain a wipe with a cloth, because soap residue on the drain wall will stop a new gasket sitting flat. Drop the new stopper in and press the top.\n\nRun the faucet until the sink is a few inches deep, then leave it for five minutes and look at the level. If it has not moved, you are done. If it has crept down, lift the stopper out, check nothing is caught under the gasket and that the drain wall is clean, then try again.\n\nThat is the entire installation. No tools, no sealant, no tape.\n\nKeeping it working\n\nThe maintenance routine is one minute a week. Lift it out, tip the hair into the garbage, rinse the basket under warm water and put it back.\n\nEvery so often give it a closer clean. An old toothbrush clears soap film from the basket mesh and from the underside of the cap. Wipe the silicone gasket with a soft cloth so it stays smooth, because soap build-up on silicone is the usual reason a seal that worked fine last month has gone soft.\n\nSkip the abrasive pads and the scouring powder. They scratch metal and they will take the shine off a brass finish. And skip the chemical drain cleaners altogether. They are hard on silicone and they do not solve anything a basket and a weekly rinse would not have prevented.\n\nIf the water starts going down slowly, check the basket first. Nine times out of ten that is the whole story.\n\nThe short version\n\nA pop up bathroom sink stopper does two jobs that most sinks handle badly. It seals on demand with one press, and it keeps hair out of your pipes with a basket you can empty in seconds.\n\nThis one is built from brass and stainless steel with a stepped silicone gasket, measures 6.1 cm wide by 4.7 cm high, and drops into drain openings between 1.02 and 1.96 inches that are at least about 1.89 inches deep. No tools, no plumbing work.\n\nMeasure your drain opening and depth first. Get those two numbers right and the rest of it takes a minute.", "llm_summary": "A pop up bathroom sink stopper with a removable anti-clogging basket inside the body. The core is made from brass with stainless steel. Pressing the top seals the drain and pressing again releases it, using a bullet shaped spring core. A thickened stepped silicone gasket sits against the drain wall to help hold back drain odour. The maker lists item dimensions of 6.1 cm wide by 4.7 cm high, an inner diameter of about 1.02 inches, and suitability for drain openings between 1.02 and 1.96 inches with a drain depth of around 1.89 inches or more. Installation is tool free on compatible drains. Colour, finish, weight and packaged dimensions are not specified by the maker.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; provincial consumer protection law for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "EzyDrains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://ezydrains.net/pop-up-bathroom-sink-stopper-with-basket/", "canonical_url": "https://ezydrains.net/pop-up-bathroom-sink-stopper-with-basket/", "json_url": "https://ezydrains.net/api/products/pop-up-bathroom-sink-stopper-with-basket.json", "updated_at": "2026-10-12" }