{ "id": "round-floor-drain-cover-110-mm", "sku": "round-floor-drain-cover-110-mm", "title": "Round Floor Drain Cover 110 mm", "slug": "round-floor-drain-cover-110-mm", "price": 33.99, "currency": "CAD", "availability": "in_stock", "category": "outdoor-drain-covers", "category_label": "Outdoor & Floor Drain Covers", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "0.02 kg", "images": [ "https://ezydrains.net/dropship-images/outdoor-drain-covers/round-floor-drain-cover-110-mm/main-round-floor-drain-cover-110-mm.jpg", "https://ezydrains.net/dropship-images/outdoor-drain-covers/round-floor-drain-cover-110-mm/round-floor-drain-cover-110-mm-2.jpg", "https://ezydrains.net/dropship-images/outdoor-drain-covers/round-floor-drain-cover-110-mm/round-floor-drain-cover-110-mm-3.jpg", "https://ezydrains.net/dropship-images/outdoor-drain-covers/round-floor-drain-cover-110-mm/round-floor-drain-cover-110-mm-4.jpg", "https://ezydrains.net/dropship-images/outdoor-drain-covers/round-floor-drain-cover-110-mm/round-floor-drain-cover-110-mm-5.jpg", "https://ezydrains.net/dropship-images/outdoor-drain-covers/round-floor-drain-cover-110-mm/round-floor-drain-cover-110-mm-6.jpg", "https://ezydrains.net/dropship-images/outdoor-drain-covers/round-floor-drain-cover-110-mm/round-floor-drain-cover-110-mm-7.jpg" ], "description_short": "A flat stainless steel grate sized for an 11 cm (about 4.3 in) groove, corrosion-resistant and easy to lift out whenever you want to rinse it.", "description": "The small part that causes big problems\n\nFloor drains are easy to ignore until the cover goes missing. Then the drain turns into a funnel for everything that lands on the floor. Leaves blow in. Petals drop off a planter. Grit comes off the bottom of boots. A screw rolls off a workbench. All of it goes down the pipe, and some of it stays there.\n\nThe annoying part is how long the trouble takes to show. You will not notice a problem on day one. Months later the water starts sitting on the floor after rain, and by then there is a mat of leaf mulch and silt somewhere in the line. Clearing that costs real money or real time. A flat metal grate sitting over the opening would have stopped most of it.\n\nThat is the whole argument for a round floor drain cover 110 mm. It is a cheap, simple barrier that keeps solids on the surface where you can see and sweep them.\n\nHow a drop-in grate works\n\nThere is nothing clever going on here, which is a feature rather than a criticism. A floor drain usually has a shallow recess, sometimes called a groove, at the top of the pipe. The original cover sits in that recess. This cover does the same thing.\n\nWater passes through the open pattern in the grate. Anything too large to fit through the openings stays on top. When enough debris builds up that water slows down, you lift the grate out, rinse it, and put it back. That is the full maintenance routine.\n\nThe cover here is made for a compatible groove diameter of 11 centimetres, which is roughly 4.3 inches. Item depth is listed as a few millimetres, so it sits nearly level with the floor instead of standing proud. That matters more than it sounds. A cover that sticks up catches broom bristles, toes and the legs of patio furniture. A flat one does not.\n\nMaterial is stainless steel, with a stainless steel finish, and the maker lists it as corrosion-resistant. For a part that spends its working life wet, that is the right pick. There is no paint to chip and no coating to peel.\n\nWho it suits\n\nIf you have an outdoor floor drain with a round opening in the 11 cm range, this is a straightforward fix. The most common spots are balconies, roof terraces, patios, decks and yard drains near a downspout outlet.\n\nBalconies are the classic case. They sit under trees or next to planters, they get rained on, and the drain is often the only outlet for the whole floor area. A best balcony drain cover does not need to be fancy, it just needs to be the right size and easy to lift. Roof drains are similar, with more wind-blown debris and less foot traffic.\n\nIndoor use works too. Laundry rooms, garages and basement utility areas often have a floor drain that lost its cover during a renovation. The stainless finish does not look out of place on tile or concrete.\n\nWhere this is not the answer is anywhere a vehicle drives, or any spot that needs a locked-down, load-rated grate. A loose drop-in cover is for foot traffic and weather, not for a driveway. If your drain sits in a trench or a square opening, a round cover is also the wrong shape.\n\nGetting the size right\n\nThis is the one step people rush, and it is the one that decides whether the cover works.\n\nMeasure across the recess, not the pipe. The groove at the top of a floor drain is wider than the pipe below it, so measuring the pipe will give you a number that is too small. Lift out whatever is in there now, lay a tape across the widest part of the recess, and write that number down.\n\nTake a second measurement at ninety degrees to the first. Older drains are not always perfectly round, and if your two numbers differ by much, a round cover may rock rather than seat flat.\n\nCompare the result with the 11 cm figure. Close is fine, exact is better. A cover slightly too large will not drop in at all. A cover much too small will sit low, slide around, or fall through. The best 110 mm drain grate for your floor is simply the one whose measurement matches yours.\n\nKeep in mind that measurements on small metal parts can vary by a millimetre or two. If your recess measures right on the edge of the range, consider whether a small gap is acceptable in your spot.\n\nLiving with it\n\nCleaning is where a loose grate beats a screwed-down one every time. Hook a finger under the edge, lift, rinse, replace. No screwdriver, no sealant, no mess. Warm water and a little mild dish soap handle anything greasy. Dry it with a soft cloth if you care about water spotting.\n\nSkip steel wool and scouring powder. They leave fine scratches that collect grime faster than a smooth surface does. A soft sponge is enough for everything a floor drain throws at a grate.\n\nHow often depends on your setting. A sheltered balcony might need attention twice a season. A patio under a maple tree in autumn might need a weekly sweep. The honest test is visual. If you can see the openings filling up, deal with it before the next downpour.\n\nWe would also steer you away from chemical drain cleaners. If water is pooling, lift the cover and look. Most of the time the blockage is right at the top and comes out with a gloved hand. Anything deeper, or anything involving cutting, moving or connecting pipe, is a job for a licensed plumber.\n\nWhat a grate will and will not do\n\nWorth being clear, because the claims around drain products get silly. A grate is a screen. It catches solids.\n\nIt will not seal odour out of the room. Smell coming up from a drain points at the trap, and that is a plumbing matter.\n\nIt will not clear an existing blockage further down the line. Fit the cover after the pipe is clear, not instead of clearing it.\n\nIt will not fit every drain, no matter how the product photos look. Size is size.\n\nWhat it does do is stop the steady drip of debris that creates blockages in the first place. That is a real benefit, and it is worth the price of a small piece of stainless steel.\n\nA note on buying more than one\n\nMost homes with one outdoor floor drain have two or three. Balcony, patio, side yard. Since each pack contains a single cover, order to match. Some people keep a spare in a drawer so there is always a clean, dry grate ready to go while the other one is drying after a scrub. At this size and weight, a spare costs almost nothing to store.\n\nThe short version\n\nA round floor drain cover 110 mm is one of those parts that quietly earns its keep. Stainless steel, corrosion-resistant, flat enough to stay out of the way, and loose enough to lift and rinse in seconds.\n\nMeasure the groove at the top of your drain. If it is around 11 cm, this grate should drop straight in. Rinse it when it looks clogged, and leave anything inside the pipe to a licensed plumber. That is all there is to it.", "llm_summary": "This is a single round stainless steel floor drain cover sized for a compatible groove diameter of 11 centimetres, roughly 4.3 inches. The maker lists the material and finish as stainless steel, the special feature as corrosion-resistant, the style as modern, the item depth as a few millimetres and the item weight as 0.02 kg. It ships as one count. The flat grate drops into a matching recess without tools and is lifted out by hand for rinsing. It is intended for outdoor floor drains such as balconies, roofs, patios and yard drains, where it holds back leaves and grit while water passes through. Colour, exact overall diameter, country of origin are not specified by the maker.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; provincial consumer protection law for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "EzyDrains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://ezydrains.net/round-floor-drain-cover-110-mm/", "canonical_url": "https://ezydrains.net/round-floor-drain-cover-110-mm/", "json_url": "https://ezydrains.net/api/products/round-floor-drain-cover-110-mm.json", "updated_at": "2026-10-12" }