{ "id": "silicone-tub-stopper-6-inch-2-pack", "sku": "silicone-tub-stopper-6-inch-2-pack", "title": "Silicone Tub Stopper 6 Inch 2 Pack", "slug": "silicone-tub-stopper-6-inch-2-pack", "price": 17.99, "currency": "CAD", "availability": "in_stock", "category": "sink-and-tub-stoppers", "category_label": "Sink & Tub Stoppers", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "100 g", "images": [ "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-6-inch-2-pack/main-silicone-tub-stopper-6-inch-2-pack.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-6-inch-2-pack/silicone-tub-stopper-6-inch-2-pack-2.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-6-inch-2-pack/silicone-tub-stopper-6-inch-2-pack-4.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-6-inch-2-pack/silicone-tub-stopper-6-inch-2-pack-5.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-6-inch-2-pack/silicone-tub-stopper-6-inch-2-pack-6.jpg", "https://ezydrains.net/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-6-inch-2-pack/silicone-tub-stopper-6-inch-2-pack-7.jpg" ], "description_short": "Two soft 6 inch (15.2 cm) silicone covers that lay over a flat, smooth drain in the tub, the bathroom sink, the kitchen or the laundry, with no fitting, tools or hardware needed.", "description": "The problem with the plug you already have\n\nAlmost everyone has had the same bath. You run the hot water, get in, and ten minutes later the water line has dropped an inch. The plug is still in place. It just is not sealing any more.\n\nThere are a few usual reasons. The rubber plug that came with the tub has gone hard and no longer squashes into the drain. The pop-up mechanism has drifted out of adjustment, or the linkage underneath has corroded. Or the drain opening is simply wider than any plug you can find in a shop, which is common in older tubs and in laundry tubs.\n\nFixing the hardware means getting under the fixture, which often means calling a licensed plumber. That is the right call when a pipe or a fitting is the problem. But if all you want is to hold water in the tub, there is a much simpler fix that works from above.\n\nHow a flat suction drain cover works\n\nA flat suction drain cover does not go into the drain at all. It lays on top of it, like a lid over the opening, and it seals against the flat surface around the hole.\n\nThe physics is the same as a suction cup on a window. Wet the surface, lay the soft silicone down, press from the middle outwards, and the air trapped underneath escapes at the edges. Once that air is gone, the pressure of the air above holds the cover down. Add water to the tub and the weight of that water pushes the cover down even harder, so a full tub tends to seal better than a shallow one.\n\nTo drain, you lift one edge with a finger. Air rushes back under, the hold breaks instantly, and the water goes. There is no twisting, no pulling against a stuck plug, and nothing to jam.\n\nThat simplicity is the whole appeal. It does not care whether your pop-up works, whether the original plug has gone missing, or whether the opening is an odd size. It only cares about one thing, which brings us to the next part.\n\nThe one thing to check before you buy\n\nThe surface around your drain has to be flat and smooth.\n\nThis is the single factor that decides whether a suction stopper works for you. Silicone is flexible and will handle a very slight dome, but it cannot bridge a textured finish, a raised decorative rim, a deep chip, or a crust of built-up limescale. Any of those leave a channel for air, and air under the edge means no seal.\n\nSo before you order, look at your drain, not just at the stopper. Put a finger flat on the area around the opening and run it outward in a circle. If it feels smooth and even for a good 3 inches in every direction from the centre of the drain, you are in good shape. If you feel ridges, grit you cannot wipe away, or a step up to a metal rim, think twice.\n\nMeasure as well. This cover is 6 inches (15.2 cm) across. You need that much clear, smooth, flat surface for it to sit on. In a wide tub or a laundry tub that is usually easy. In a small bathroom sink bowl, it can be tight, so hold a tape measure across the bottom of the bowl first.\n\nWho this suits\n\nA 6 inch silicone cover is a good match for a few specific situations.\n\nIf you have a wide tub drain and the original plug is long gone, this is the easiest replacement you will find, because it does not need to match the opening diameter at all. It just needs to be bigger than the hole, and at 6 inches it comfortably is.\n\nIf your pop-up stopper has stopped sealing, this lets you keep using the tub while you decide whether to repair the mechanism. Plenty of people never get around to the repair, because the cover does the job.\n\nIf you fill a kitchen sink for soaking or hand washing, a flat cover gives you a seal over an opening that a basket strainer no longer closes properly. The same goes for a laundry tub, where drains are often wide and plain.\n\nIt suits renters especially well. Nothing is fitted, nothing is modified, and the cover leaves with you.\n\nWho it does not suit: anyone with a textured or decorative drain surround, anyone whose drain sits in a recessed well that a flat disc cannot reach across, and anyone who wants a permanent fixed fitting rather than something that lifts off.\n\nWhy two in the pack matters more than it sounds\n\nGetting a pair is not just a bonus. In practice it changes how you use them.\n\nWith one stopper you end up carrying it between rooms, which is exactly how plugs get lost in the first place. With two, one stays in the bathroom and one stays in the kitchen or laundry. Each room keeps its own, and neither one wanders.\n\nIt also means you have a spare. If one picks up a stain from hair colour or gets nicked on a sharp edge, you are not without a stopper that evening.\n\nGetting a good seal, every time\n\nA suction cover is forgiving once you know the routine, and it is short.\n\nStart with a clean drain area. Wipe away soap film, hair and grit, because anything caught under the edge becomes a leak path. Soap residue is the sneaky one, since it feels smooth but stops the silicone gripping.\n\nWet the surface lightly. A damp surround seals far better than a bone dry one, as the water fills the tiny gaps in the surface.\n\nPlace the cover centred over the opening, then press down with the flat of your hand starting at the middle and working out to the rim. You are chasing the air out ahead of your hand. Pressing at the edge first traps air in the middle, which is the most common mistake.\n\nGive it a light tug upward from the centre to check. If it resists, you are set. If it lifts, dry everything and start again.\n\nLooking after it\n\nCare is genuinely easy. Rinse it under warm running water after a bath, and wipe both faces with your hand or a soft cloth. The underside is the one that matters, since that is the sealing face.\n\nOnce in a while, wash it with a little mild dish soap to cut through the film that builds up from soaps and bath products. Rinse well and let it dry.\n\nKeep it away from abrasive scouring pads, which can scuff the sealing face, and away from strong chemical cleaners. Store it flat rather than folded or rolled, because a crease left in soft silicone for weeks can leave a line that air travels along.\n\nIf it ever stops holding as well as it did, the fix is almost always a thorough wash of both the cover and the drain surround, not a new stopper.\n\nA realistic look at the limits\n\nIt is worth being straight about what a suction cover will not do. It is not a repair for broken plumbing, and it will not help if water is escaping somewhere other than the drain opening. It is also not a strainer, so it does not catch hair while water runs through.\n\nIt will not seal on a surface it cannot grip. No suction stopper will, regardless of price or brand. If your surround is textured, the honest answer is that you need a different type of stopper or a hardware repair.\n\nAnd because it lifts off by design, it is not a childproof fitting. That is a feature when you want the tub to empty quickly, but it is worth knowing.\n\nThe short version\n\nThis is a pair of soft silicone covers, each 6 inches (15.2 cm) wide and about 0.7 in (1.7 cm) high, that seal a drain by suction instead of plugging it. They suit flat, smooth drain surfaces in a tub, bathroom sink, kitchen sink or laundry tub, and they need no tools, no fitting and no plumbing work.\n\nCheck that you have a clear, smooth, flat ring of at least 6 inches around your drain. If you do, this is one of the cheapest and quickest ways to get a tub that holds a full bath again. If your surround is textured or uneven, this is not the right product for you, and we would rather you knew that before it arrives.", "llm_summary": "A two pack of soft silicone drain covers used as a tub stopper, bathroom sink stopper or kitchen and laundry drain plug. Each cover measures about 6 inches (15.2 cm) wide and 0.7 in (1.7 cm) high, and the pack weighs 100 g. The stopper is not fitted or installed. It lays flat over the drain opening and holds by suction once the trapped air is pressed out, and it releases when an edge is lifted. It suits flat, smooth drain surfaces, including flat, open and slightly domed drains, and will not seal reliably on textured or uneven surrounds. Colour, country of origin and overall packaged dimensions are not specified by the maker. Care is a rinse and occasional wash with mild dish soap.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; provincial consumer protection law for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "EzyDrains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://ezydrains.net/silicone-tub-stopper-6-inch-2-pack/", "canonical_url": "https://ezydrains.net/silicone-tub-stopper-6-inch-2-pack/", "json_url": "https://ezydrains.net/api/products/silicone-tub-stopper-6-inch-2-pack.json", "updated_at": "2026-10-12" }