{ "id": "stainless-and-silicone-shower-hair-catcher", "sku": "stainless-and-silicone-shower-hair-catcher", "title": "Stainless and Silicone Shower Hair Catcher", "slug": "stainless-and-silicone-shower-hair-catcher", "price": 27.99, "currency": "CAD", "availability": "in_stock", "category": "shower-drain-hair-catchers", "category_label": "Shower & Tub Hair Catchers", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "45 g", "images": [ "https://ezydrains.net/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/main-stainless-and-silicone-shower-hair-catcher.jpg", "https://ezydrains.net/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-2.jpg", "https://ezydrains.net/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-3.jpg", "https://ezydrains.net/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-4.jpg", "https://ezydrains.net/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-5.jpg", "https://ezydrains.net/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-6.jpg" ], "description_short": "A rust resistant stainless steel screen with oval slots and a soft silicone rim, built to grab hair while the centre stays open so the shower still drains at full speed.", "description": "The slow drain nobody notices until it is bad\n\nA shower rarely blocks overnight. It creeps. One week the water clears instantly, a month later there is a small puddle by the time you turn the faucet off, and six months on you are standing in water up to your ankles halfway through a wash. By then the problem is well down the pipe and genuinely annoying to deal with.\n\nThe cause is almost always hair. Not a dramatic amount of it, just the normal shedding that happens to everyone. Each strand that slips through the drain opening finds something to catch on inside the pipe, usually a joint or a rough patch. Conditioner, body wash and shampoo residue stick to that hair. The clump gets bigger, water flows slower, and the slower it flows the more residue settles out. It feeds itself.\n\nA hair catcher breaks that cycle at the only point where it is easy to deal with, the surface. Hair that never enters the pipe cannot build up in it. The trade-off people worry about is drainage, because a lot of cheap screens turn your shower into a wading pool within a week. That is really the question worth thinking about when you choose one.\n\nHow this one works\n\nThe screen is stainless steel with oval slots cut across it. The shape is deliberate. A round hole lets a strand of hair find a path straight through, point first. An elongated slot sits across the direction most hair travels, so strands lie against the edge and stay on top. Water, which does not care about shape, goes through either way.\n\nIn the middle there is a half-round open section. This is the part that keeps the shower usable. Even when the slotted area is holding a day or two of hair, the open centre gives the water a clear path down. You get the filtering without the pooling, at least until you let the hair build into a thick mat, at which point nothing will save you except a ten-second clean.\n\nAround the outside is a soft silicone rim. It does two jobs. It lets the catcher settle against the shower floor rather than balancing on it, which keeps it from sliding around when water hits it, and it closes the gap at the edge so smaller bits of debris do not slip underneath. It also means no metal edge dragging on tile or acrylic.\n\nThe whole thing is 12.1 cm wide and 1 cm high, and weighs 45 g. The low profile matters more than you might think. A tall dome catches toes and collects soap film on the sides. A flat shower drain protector sits out of the way and looks like part of the shower rather than an accessory parked on it.\n\nWho it suits\n\nHouseholds with long hair get the most obvious benefit. If someone in the house sheds enough to leave a visible handful in the drain after each shower, a catcher pays for itself the first time it saves you a plumber call. Shared bathrooms in family homes and student housing are the same story, just multiplied.\n\nIt also suits anyone renting. Nothing is glued, screwed or cut. It sits on the drain and lifts off whole when you move out, which cannot be said for most fixed solutions.\n\nPeople with pets washed in the shower will find it handles fur reasonably well, though fur mats faster than human hair and will need emptying more often. And if you have already had one slow drain fixed and do not want a repeat, this is the cheap insurance part of the job.\n\nWhere it is not the right pick, be honest with yourself: if your drain opening is clearly wider than 12.1 cm, or your grate is square or domed rather than flat and round, the fit will not be good and you should look for a different shape.\n\nMeasuring before you order\n\nThis is the one step people skip and then regret. Take a tape measure to your shower, sit it across the drain opening and read the widest point. If you want the catcher to cover the surrounding metal ring as well, include that in your measurement.\n\nCompare the number to 12.1 cm. If your opening is smaller, you are fine, the catcher will overlap and the silicone rim will sit on the shower floor around it. If it is a close match, also fine. If it is larger, the catcher will drop into the hole or leave a gap at the edge, and hair will go around rather than through. A larger round shower drain strainer is the answer in that case, not this one.\n\nCheck the surface around the drain too. The silicone rim needs a reasonably flat, smooth area to seat against. If your drain sits in a dip or a textured section of tile, the rim will not sit flush and small debris can get under the edge.\n\nChoosing between materials\n\nYou will see three common builds when you shop for one of these. Thin plastic, pure silicone, and metal with a silicone edge.\n\nPlastic is cheapest and does the job for a while. It also tends to discolour with hot water and hair dye, and the thinner ones go brittle and crack at the rim after a year or so.\n\nAll-silicone catchers are soft and grip well, but the slots need to be thicker to hold their shape, which means fewer openings and slower drainage. They also tend to hold onto hair more stubbornly when you try to tip it off.\n\nMetal with a silicone edge, which is what this is, splits the difference. The steel screen stays rigid so the slots stay the right size, and it does not warp or discolour. The silicone handles the contact with the shower floor, where you actually want softness. That is why it is a common choice for anyone shopping for the best shower hair catcher that will last more than a season.\n\nKeeping it working\n\nThe routine is quick. Lift the catcher off, tip the hair straight into the garbage rather than trying to rinse it down the drain, then run the screen under the faucet. If soap film has built up on the silicone, a cloth and a little dish soap sorts it. Dry it, put it back, done.\n\nEvery few days is enough for most people. Daily if the shower gets heavy use. If you leave it a week or two, the slots fill and the water starts to back up, which is when people decide the product does not work when really it just needed a ten-second rinse.\n\nSkip the abrasive pads and steel wool. Scratched steel holds soap residue more readily, and steel wool leaves tiny iron particles behind that will rust and stain. Harsh cleaners can mark the silicone rim and leave it less grippy. Dish soap and a cloth are all it needs.\n\nWhen you clean the shower itself, lift the catcher out first, clean around the drain, then put it back once everything is rinsed. That stops film building up in the ring under the rim.\n\nA note on existing blockages\n\nA hair catcher is a preventer, not a cure. If your shower is already draining slowly, fitting one will not fix it, and it may look like the catcher is causing the problem when the actual clog is further down the pipe.\n\nDeal with the existing buildup first, then fit the catcher to stop it coming back. We would avoid pouring chemical drain cleaners down there. If the blockage is stubborn or you suspect something structural, a licensed plumber is the right call, particularly if anything needs cutting or reconnecting.\n\nThe short version\n\nHair is what blocks shower drains, and the easiest place to deal with hair is on the surface before it goes down. This catcher uses a stainless steel screen with oval slots to grab strands, an open half-round centre to keep water draining at a normal speed, and a soft silicone rim so it stays seated and does not scratch the shower floor.\n\nIt is 12.1 cm wide, 1 cm high and weighs 45 g, so measure your drain opening first. There is no installation, which makes it a sensible pick for renters. Clean it every few days and it keeps doing its job quietly for a long time.", "llm_summary": "A stainless and silicone shower hair catcher designed to sit over a shower floor drain opening and trap hair before it enters the pipe. The screen is stainless steel with oval slots that catch strands while water passes through, and a half-round open section in the centre keeps the main drainage path clear. A soft silicone rim rests against the shower floor and helps block smaller debris from slipping under the edge. Stated dimensions are 12.1 cm wide by 1 cm high, with an item weight of 45 g. The maker's description includes one unit. Colour, country of origin and detailed material grades are not specified by the maker. Cleaning is manual, lift out, empty the hair and rinse.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; provincial consumer protection law for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "EzyDrains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://ezydrains.net/stainless-and-silicone-shower-hair-catcher/", "canonical_url": "https://ezydrains.net/stainless-and-silicone-shower-hair-catcher/", "json_url": "https://ezydrains.net/api/products/stainless-and-silicone-shower-hair-catcher.json", "updated_at": "2026-10-12" }